Divisions
Quick Links - - - - - - - - - - - - - - - - - - - - - - - - - Home About Us Best Offer Contact us TERMS Design Center Opto-elect Lasers Fiber Design Center Optical components/ devices Electronics RF Group Amplifier vco Saw Filters Osc , OCXOs , VCTCXO , Crystal filters Cavity Filter Ceramics / DR / LTCC / LC Filters Compiner/Splitter RF switch RF connectors and cables assmbly Thin Film Alumina Electro-Mechanics Disclamer Homepage Legal and copyright Sitemap
Design Center Optical Signal Generator, Optical Amplifier. ASE.High Power Laser, Modulation Bias Control, Detector, Fiber Laser Source
VI Systems GmbH
VI Systems GmbH (VIS) is a fabless developer and producer of optical engines for data transmission at ultrahigh bit rates and the related electro-optic components
Ic's offered by VI Systems
40G Driver for optical modulator
40G VCSEL driver
40G transimpedance amplifier
High sensitive APD Laser Receiver
RELA-EYESAFE (1550nm),HIGH SENSITIVE APD LASER RECEIVER
*High sensitivity - 4nw
*High dynamic range -84db (4nw to 1w)
*Miniature space (1" X1")
*InGaAs APD detector
*Fast recovery-low minimum range
*Infrared rangefinder receiver
*Ultra sensitive P-I-N version is available
*High speed laser sensor
Description:
RELA is an open space eye safe receiver designed for laser Range finding equipment.
Fast recovery (300nsec @ 1w) and high sensitivity (4nw) allows ranging to close objects and long range performance.
This ultra low-noise optical receiver is compatible with PIN or APD photodiode.
Its transimpedance gain is about 1Meg ohms (can be modified to fit the application)
And its Bandwidth is 23Mhz.
High speed comparator is included witch provide digital output.
SPECIFICATIONS:
Detector: APD, 1550nm, InGaAs, 200um
Sensitivity: 4nw typical @ 20nsec pulse width, 90% detection 0.1% FAR, 25
°c
Time programmed gain (TPG)
1/R² law operates from minimum range of ~10m to 1km.
Minimum range of ~50m with 1w To pulse.
To PULSE :> 1w or pull output to zero for 100nsec.
Minimum range: 50m with 1w.
Target discrimination <30m
Operating temperature:-40
°c to +85°c
Electrical:
Power:
± 5v (+50ma,-20ma),H.V. 60v to 80v adjustable (1ma).
Digital output: LVDS or TTL
Analog output: 0v to 4v (for alignment)
LASER RECEIVER PIN HIGH SENSITIVE,)nm1550(EYESAFE -RELI
*High sensitivity - 40nw (4nw sensitivity for APD detector)
*High dynamic range - 74db (40nw to 1w)
*Miniature space (1" X1")
*InGaAs P-I-N detector
*Fast recovery-low minimum range
*Infrared rangefinder receiver
*Ultra sensitive APD version is available
*High speed laser sensor
Description:
RELI is an open space eye safe receiver designed for laser Range finding equipment.
Fast recovery (300nsec @ 1w) and high sensitivity (40nw) allows ranging to close objects and long range performance.
This ultra low-noise optical receiver is compatible with PIN or APD photodiode.
Its transimpedance gain is 300k ohms (can be modified to fit the application) and its
Bandwidth is 23Mhz.
High speed comparator is included witch provide digital output.
SPECIFICATIONS:
Detector: PIN, 1550nm, InGaAs, 300um
Sensitivity: 40nw typical @ 20nsec pulse width, 90% detection 0.1% FAR, 25
°c
Time programmed gain (TPG)
1/R² law operates from minimum range of ~10m to 1km.
Minimum range of ~50m with 1w To pulse.
To PULSE :> 1w or pull output to zero for 100nsec.
Minimum range: 50m with 1w.
Target discrimination <30m
Operating temperature:-40
°c to +85°c
Electrical:
Power:
± 5v (+50ma,-20ma)
Digital output: LVDS or TTL
Analog output: 0v to 4v (for alignment)